- GDZ-18-2
- ER11 CNC spindle motor
- 24000rpm CNC spindle
- 0.8kw spindle motor
- water-cooled spindle motors
- Φ65mm spindle motor
- CNC graving, milling spindle motor
- Four bearing structure
- Our CNC spindle motors are supplied directly from the factory, not purchased from the lowest-priced suppliers with unknown sources, thus ensuring known quality and reliability. All CNC Router Spindles from RicoCNC are original, with No fake.
Technical Characteristics
| Type | GDZ-18-2 |
|---|---|
| Dimensions | Φ65*210mm |
| Speed | 24000RPM |
| Power | 0.8KW |
| Voltage | 220V |
| Current | 5A |
| Frequency | 400HZ |
| Bearing | 7002C/P4*2, 7000C/P4*2 |
| Collet | ER11 |
| Number of Phases | 3 |
Spindle Design
- Comparison among GDZ-18B, GDZ-18 and GDZ-18-2：
- The size of GDZ-18 is slightly longer than that of GDZ-18B. The size of GDZ-18-2 is the same as that of GDZ-18B, but the spindle length is slightly shorter, which may be more suitable for applications with limited machine space. The power of GDZ-18-2 is lower than that of the other two models (0.8KW), which is suitable for precision machining tasks with light loads. The bearing model and number are also different.
- GDZ-18 and GDZ-18B use ER16 collets, which are suitable for tools with larger diameters. GDZ-18-2 uses ER11 chucks, which are suitable for tools with smaller diameters, which may affect its applicable machining range.
- Depending on the machine tool’s specific needs and the machining task’s characteristics, electric spindles with different power and chuck specifications can be selected. For example, GDZ-18 or GDZ-18B can be selected for occasions requiring higher power and larger chucks, while GDZ-18-2 can be selected for occasions with higher precision and lower power requirements.
