- GDZ120*103-5.5(with fin)“4 pole”
- ER32 spindle motor
- 18000rpm CNC spindle
- 5.5kw air-cooled spindle motor
- 380V electro spindle motor
- CNC drilling, cutting spindle motor
- square air-cooling spindle
- 4 pole CNC router spindle
- Suitable for continuously variable speed
- Our CNC spindle motors are supplied directly from the factory, not purchased from the lowest-priced suppliers with unknown sources, thus ensuring known quality and reliability. All CNC Router Spindles from RicoCNC are original, with No fake.
Technical Characteristics
| Spindle Type | GDZ120*103-5.5(with fin) “4 pole” |
|---|---|
| Speed | 18000rpm |
| Power | 5KW |
| Voltage | 380V |
| Current | 9A |
| Frequency | 600HZ |
| Joint of Nose | ER32 |
| Lub | Grease |
| Cool | Aircooling |
| Collet | ER32 |
| Collet Nut | 3.175mm, 4mm, 6mm, 12.7mm, 16mm, 20mm |
Spindle Design
-
GDZ120*103-5.5(with fin)“4 pole”. The synchronous speed of the four-pole spindle is not as high as that of the two-pole spindle, but at the same time, it also has a higher torque, which makes it easier to handle some hard materials.
