GDZ80-1.5B 1.5kw WATER COOLED ROUTER SPINDLE
- GDZ80-1.5B
- ER11 spindle motor
- 24000rpm spindle
- 1.5kw spindle motor
- 1.5kw 220v electro spindle motor
- water-cooled spindle motors
- Φ80mm spindle motor
- CNC milling spindle motor, CNC graving spindle motor
- Our CNC spindle motors are supplied directly from the factory, not purchased from the lowest-priced suppliers with unknown sources, thus ensuring known quality and reliability. All CNC Router Spindles from RicoCNC are original, with No fake.
Technical Characteristics
| Spindle Type | GDZ80-1.5B |
|---|---|
| Diameter | Φ80mm |
| Speed | 24000rpm |
| Power | 1.5kw |
| Voltage | 220v |
| Current | 5A |
| Frequency | 400HZ |
| Torque | 0.62Nm |
| Collet | ER11 |
| bearing type | 7002*2+7002*1 |
| Weight | 4.4KG |
Spindle Design
- This is GDZ80-1.5B, which is different from GDZ80-1.5, the main difference is the collet, the GDZ80-1.5B uses the ER11, and the GDZ80-1.5 uses the ER16, so before you order, please check the collet to prevent buying the wrong type.
- Besides the differences in collets, the number and type of bearings also vary. The GDZ80-1.5B uses the 7002CP4*2+7002CP4*1, and the GDZ80-1.5 uses the 7004cp4*2+7002cp4*1. Please carefully confirm before placing an order to avoid any inconvenience caused by purchasing the wrong type.
The similar type: GDZ80-1.5B is also available here, Beside, We have other wonderful products such as GDZ62-1.2, GDZ48-300
If you need any CNC spindle, welcome to send an inquiry